Tell us what you need and we will come back with pricing. Send a message through the form below, message us directly on WhatsApp, or email us — whichever suits you.
Send Us an Enquiry
WhatsApp is the fastest way to reach us, especially across time zones. Send a message any time and we will reply when we are at work.
Replies within 12 hours, China time.
Mingyang Pipe Fittings Co., Ltd.
Cangzhou, China
For enquiries with drawings or documents attached, email works better than chat.
Response Time
We reply to enquiries within 24 hours, Monday through Saturday, Beijing time (GMT+8). Complete enquiries — with size, standard, quantity, and destination port — usually receive pricing the same day.
Oman, the UAE and most Gulf countries are four hours behind Beijing time. A message sent from Muscat in the morning usually reaches us the same afternoon Beijing time.
Location
We are based in Cangzhou, Hebei, China — China’s largest pipe fitting manufacturing cluster. All shipments leave from major Chinese ports, including Tianjin and Qingdao, depending on your destination and sailing schedule.
To Get a Faster Quote, Please Include
The more of the following you can provide, the faster we can quote. Most delays come from missing information, not from us being slow.
| Product type | flange, elbow, tee, or other |
| Standard | ASME B16.5, B16.9, or your own drawing |
| Material | ASTM A105, ASTM A234 WPB, or other grades on request |
| Size range | NPS 1/2″ to 60″, or the exact sizes you need |
| Wall thickness | Schedule number for elbows and tees |
| Pressure class | Class 150 to 2500 — for flanges only |
| Quantity | total pieces per size, or total weight |
| Destination port | for example Sohar, Muscat, Jebel Ali, Dammam |
If you have a drawing, a spec sheet, or a material requisition, send it over. A drawing answers more questions in one minute than ten emails.
What Happens Next
- You send your enquiry with the details above.
- We review the specification and confirm whether it falls within our standard supply range or needs to be made to order. If anything in your enquiry is unclear or looks mismatched — for example a wall thickness that does not suit the stated pressure, or a flange face that cannot be used at the class you specified — we will point it out before quoting.
- You receive a quotation with specification, quantity, lead time, packing, and the documents included. Pricing is quoted as one package price, quoted on request rather than published, because it depends on specification, quantity, raw material cost, and delivery schedule.
- Once the specification and terms are confirmed, we schedule production at our factory and follow the order through inspection, documentation, and shipment. You deal with one contact throughout.
Documents We Provide
Every shipment goes out with a full document set. Below is the standard list; anything additional can be arranged.
- EN 10204 3.1 material test certificate, traceable to heat number
- Commercial invoice and packing list
- Certificate of Origin
- Bill of Lading
- Third-party inspection reports (SGS, BV, or others) on request
- Fumigation certificate when wooden packing is used
Before You Write — Our Main Product Pages
If you already know what you need, say it in your message. If you are still comparing types, these pages give you the sizes, standards and pressure ratings to quote from.
- Weld Neck Flanges — Class 150 to 2500, ASME B16.5 and B16.47
- Slip-On Flanges — ASME B16.5, ASTM A105
- 45 Degree Butt Weld Elbows — long radius, ASME B16.9
- Socket Weld Flanges — small-bore high-pressure piping